SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Problem with PWR in DI card

4/11/2019 3:58 PM	Rate (0)
AutoGen_2087715 Posts: 4 Rating: (0)	Hello i have a problem with DI8x24vdc card. The PWR led is not flashing. i have a 1510P cpu DI8x24VDC light socket DQ16x24VDC gray socket So the outputs card get power from the inputcard, but in the inputs card does not get any power and i dont understand why. It is not my first meet with the et200 hardware configuration, therefore i have been losting. Please if you have any advice share with me. Thanks a picture can be find in the attachment. The blue wire 24v is connected to L+ the white wire 0 is connected to M i would like to use some 2 wires sensors. Attachment 57210732_2276177365978360_1855027694043922432_n.jpg (310 Downloads)
AutoGen_2087715 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/11/2019 4:27 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/15/2026 Posts: 4848 Rating: (512)	Change the input card to another one, to see if it's broken. The backplane has power, as you can for your self.

Suggestion To thank Quote Answer

4/11/2019 4:52 PM	Rate (0)
#dP Posts: 2826 Rating: (692)
#dP Posts: 2826 Rating: (692)
Suggestion To thank Quote Answer

4/12/2019 9:28 AM	Rate (0)
AutoGen_2087715 Posts: 4 Rating: (0)	the fuse cannot be my the problem. at my knoweledge the white soket give power to dark sokets. in my case the dark soket get power from white soket. Besides that i changed the sequence of cards. Now the output card is flating in the white soket and the input card flating in the dark soket Unfortunatelly now the outputs card does not get pwr. So only the first participant of ET200 does not get any PWR . Thanks yours answers.
AutoGen_2087715 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/12/2019 9:30 AM	Rate (0)
AutoGen_2087715 Posts: 4 Rating: (0)	And i tried to change the white socket. So now it is an other socket then earlier.
AutoGen_2087715 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/12/2019 11:58 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/15/2026 Posts: 4848 Rating: (512)	The fuse is in the module, not in the base part of ET200SP.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users #dP AutoGen_4474425

Share this page:

Share this page on...