Hi to all,

I was able to create and put inside the IOT the openvpn, but now I don't know how to configure the client file and how to start it inside the IOT. Do you know how to do this?

Thanks for the help.

Best regards,

MCRocha

------------------------------------------------------------------------------------------
Split from OpenVPN on IOT2040.

HI MCRocha,

please have a look on the hyperlinks in the thread, where your question were posted first. Following there is a summary of all hyperlinks:

• http://cgit.openembedded.org/meta-openembedded/tree/meta-networking/recipes-support/openvpn/openvpn_2.4.6.bb?h=master#n1
  
• https://support.industry.siemens.com/tf/ww/en/posts/how-to-build-your-own-iot2000-image/206928/?page=0&pageSize=10
  
• https://support.industry.siemens.com/tf/ww/en/posts/177554/ 
  
• https://support.industry.siemens.com/tf/ww/en/posts/183289 
  
• https://openvpn.net/community-resources/reference-manual-for-openvpn-2-4/ 
  
• https://openvpn.net/community-resources/how-to/