Navigation
What software and version is needed to make program changes to CPU313C-2 DP
Created by: LRuiz1 at: 12/14/2020 9:45 PM (2 Replies)
Rating 
Thanks 1
3 Entries
| 12/14/2020 9:45 PM | |
|
Posts: 1 Rating:
|
What software and version do I need to make program changes to - CPU313C-2 DP V2.6.1 ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 12/15/2020 09:31:01New subject after splitting |
|
| 12/15/2020 4:31 AM | |
Joined: 12/18/2014 Last visit: 1/9/2026 Posts: 36421 Rating:
|
STEP7 V5.4 + SP3 or higher or STEP7 V5.3 + SP2 or higher with HSP 0123 New Firmware Version V2.6 for S7-300 CPUs
|
This contribution was helpful to
|
|
| 12/21/2020 2:39 PM | |
|
Posts: 5521 Rating:
|
hi together, also TIA knows this CPU. So an access and also doing changes should be possible with any Step7-SW, classic or TIA. Do you have a project? regards |
Follow us on