Hi,

DMG specialise in making their plc program and hardware protected to ensure you have to use dmg engineers to change or diagnose anything.

There should be profinet i/o and also s120 drives in the hardware configuration.

They have more instructions in some of their blocks than I use in a whole program.

It's good for dmg service business, not good for dmg customers.

If you find a way to work on it and download a new configuration let me know.

Pee

Hm. I didn't expect it to be so complicated. I asked a man who works in a DMG tech service and he told me to try to upload through the X120 with a fixed IP address settings. It should be easy he told as he did it a couple of days before and all was OK with the hw config. It's strange. Need to check this.  

Pee El Sea

Hi,

DMG specialise in making their plc program and hardware protected to ensure you have to use dmg engineers to change or diagnose anything.

There should be profinet i/o and also s120 drives in the hardware configuration.

They have more instructions in some of their blocks than I use in a whole program.

It's good for dmg service business, not good for dmg customers.

If you find a way to work on it and download a new configuration let me know.

Pee