I have download the GSD files for ET200b devices and uploaded them to TIA.

I can find my ET200b on profibus. I Put the device in the network overview and connect it to the profibus network.

My PLC gives SF and BF error's. When I go online  I can't see diagnostics about my ET200b.

Also i can not add tags into my ET200b, TIA says "no tags available".

- TIA Version : V15

- Hardware Modules numbers : ET200b 16DO/2A

Can Anyone help me?

Thanks!

TiHw 

Hello,

pls zip screenshots from your cfg, where is ET and addresses which you've defined as I/O buffer, cfg of your CPU PB network. If you not connect to PB Master system, it can be problem then with functionality.

Hi I try to download again, that does not help. PB is correct.

See the SreenShots

 Hello,

again pls,

Duris_I

Hello,

pls zip screenshots from your cfg, where is ET and addresses which you've defined as I/O buffer, cfg of your CPU PB network. If you not connect to PB Master system, it can be problem then with functionality.

 that's not enough infos. For proper functionality you need have configured station number of ET200B (is there some switch/coder to set this address?) and have same set on S7 project. Next is required to have station ON, also think that PLC Master CPU can show some LEd indication about some problem. Where you have that informations? If you attch some Slave to your Master system, Slave will ocuppied some I/O addresses what you have to use for access to it. Your screenshot only shows name but not that slots I/O. Pls check web for ET200B manual keywords to read all infos how configure/comissioning this ET200B module.

Hello TiHw;

To complete Duris_I's post, here is the link to the Et 200B's manual:

https://support.industry.siemens.com/cs/ww/en/view/1144452

Hope this helps, 

Daniel Chartier