Navigation
How to go back in the first Setup for IOT 2050 1YA2 FS:02
Created by: JPXluke at: 2/18/2022 1:37 PM (3 Replies)
Rating 
Thanks 0
4 Entries
| 2/18/2022 1:37 PM | |
|
Posts: 6 Rating:
|
I did the first setup of the IOT2050 and I ended up not selecting node-RED. I needed to know how to redo the setup or how to enable Node-RED. |
| 2/18/2022 1:45 PM | |
Joined: 4/28/2015 Last visit: 4/24/2025 Posts: 3345 Rating:
|
Hi, please follow chapter 3.2 in the PDF attached to this entry. You need the Service Stick, as the sources are only the stick. Unfortunately I still can't open my private messages, so you can't write your email address to me, which I need to provide the stick. Best regards! |
|
Not working for IOT2050 support anymore from March 1st, 2024. |
|
| 2/18/2022 2:29 PM | |
|
Posts: 6 Rating:
|
[snip] or [snip] |
Last edited by: Jen_Moderator at: 02/21/2022 08:51:37Removed E-Mail address. |
|
Follow us on