Is there any configuration way in Microwin 4.0 to change baud rate of EM277?
Created by: SYH_66 at: 7/2/2022 11:29 AM (1 Replies)
Rating 
Thanks 0
2 Entries
| 7/2/2022 11:29 AM | |
Joined: 6/13/2021 Last visit: 8/20/2024 Posts: 6 Rating:
|
Hello Friends, I want to communicate Weintek HMI MT6070iH via EM277. But the problem is that my EM277 is communicating at Baud rate 187.5 kbps while my HMI is communicating at 9.6 kbps. Can i change my EM277 baud rate to 9.6 kbps. Is there any configuration way in Microwin 4.0 to change baud rate of EM277? Thanks in advance Regards, Syed Yasir Hussain ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/27/2022 14:11:08New subject after splitting |
|
| 8/5/2022 7:56 AM | |
Joined: 4/28/2015 Last visit: 4/19/2025 Posts: 10876 Rating:
|
Hello, yes, you can cfg em inside Microwin module cfg, speed, address,... |
|
With best regards... |
|
Follow us on