Open faceplates created on a TP1500 HMI on a MTP1500 Unified Comfort project
Created by: mayssa_slimen145 at: 3/18/2025 1:52 PM (2 Replies)
Rating 
Thanks 0
3 Entries
| 3/18/2025 1:52 PM | |
Joined: 3/27/2024 Last visit: 8/1/2025 Posts: 18 Rating:
|
Hi all how I can open faceplates created on a TP1500 HMI on a MTP1500 Unified Comfort project. any solutions ? Thanks ------------------------------------------------------------------------------------------ |
Last edited by: Moderator_Lan at: 03/18/2025 14:16:09New subject after splitting |
|
| 4/1/2025 12:54 PM | |
Joined: 8/3/2009 Last visit: 9/10/2025 Posts: 16386 Rating:
|
Hello mayssa_slimen145 WinCC Comfort/Advanced and Unified are completley different systems. With Data2Unified you can do a few steps automatically but all in all you will have to make the faceplates in a new way because also the controls and screen objects are different, also Scripts and dynamisations are different. For general help in Unified doing faceplates you can have a look in the help system or check this FAQ: https://support.industry.siemens.com/cs/de/en/view/109812366 Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on