You have to unlock the blocks first using the password for the know-how.

Are you using TIA V16?

 Is this solved? 

i have the same problems

if anybody can help me ,pls answer it ,thansk

sixthomas

Anyone use the library V1.1 ?

I have just problem with MC_Power and MC_Reset, they don't work
 1200 or 1500, LXM32

No problem with MC_Readerror, parameter, position etc...
No problem with Write_parameter, SetPosition etc...

MC_Reset -> no return, no Done, no Busy, no Error   so ???
MC_Power -> error directly

Over blocks, can't test for the moment (no power_enabled)

DriveStatus is on 4, no errors occured

No problem when i use SoMove to start and move the drive

I open a request at Schneider, but no reponse yet

If someone use this library and don't have this problem, I will be sure that it is a problem with the drive...

Thanks !

sixthomas

Yes, I was annoying by this problem one weeks ago....

When use blocks from a library, be careful that you don't have block with same number (but you cannot know before you copy/paste)

So, better import library in a empty project, compile, then import your block from your initial project

>>>> https://support.industry.siemens.com/tf/fr/fr/posts/compile-lxm32-blocks/167117/?page=0&pageSize=10

Regards

 Hi, 

my quoted post was the solution for sixthomas at that time. Since you probably didn't read the tip topic completely: 
Please tell us which system & software you are using, what problem you are having and what you have tried so far (attach screenshot might be helpful)

BR,
Noodles

Dear admin

i can't download SE_Motion_LXM32_1200_1500_V2200  send again please 

thak_thak67

Dear admin

i can't download SE_Motion_LXM32_1200_1500_V2200  send again please 

 Just tested, and the download works fine.