SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

TOO LOW TORQUE ON MOTOR SHAFT

5/12/2014 1:53 PM	Rate (0)
Mrazzomor Posts: 1 Rating: (0)	Dear all, I have a problem with the work of DC motor, which is powered by SIMOREG, type: 6RA7013-6DV62-0-Z. We have motor with following data : V 1/min A kW 58-420 10-2590 8,35-8,65 0,011-2,85 420 4400REG. 8,65 2,85 Err/excit V A FREMD 310 0,84 80 0,26 DC drive is parameterized and put into operation correctlyand complied with all steps. Motor runs winder and the average speed is about 40 rev/min. Motor does not have the gear and the shaft is connected directly.The average weight of the burden that he runs around 100-200 kg. When starting the engine, it has a very small torque.It is possible to hand stop turret and turn it the other direction. Can someone help me to solve this problem?Is the problem to the engine, DC drive or that the engine have no gearbox. Thanks a lot!
Mrazzomor Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/12/2014 3:56 PM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (882)	Hello, How you have configured the drive. Please visit thislinkfor more detailed information.

Suggestion To thank Quote Answer

5/12/2014 6:29 PM	Rate (0)
metwally mustafa Silver Member Joined: 10/10/2010 Last visit: 7/5/2025 Posts: 309 Rating: (15)	the drive should be configured by performing motor data identification

Suggestion To thank Quote Answer

5/12/2014 6:49 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 8/22/2025 Posts: 2218 Rating: (282)	metwally mustafa the drive should be configured by performing motor data identification Please tell us what should be done to make this procedure when: Mrazzomor DC drive is parameterized and put into operation correctlyand complied with all steps.

Suggestion To thank Quote Answer

5/12/2014 7:14 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 8/22/2025 Posts: 2218 Rating: (282)	Mrazzomor When starting the engine, it has a very small torque.It is possible to hand stop turret and turn it the other direction. Hello. Your motor has a low power, just 2.85kW. Check your torque/current limits. From where your drive is controlled? Usualy, in winder applications, torque/current limits are variable setpoints from external source. Check these limits in K0143, K0144 and K0131, K0132 at speed 40rev/min.

Suggestion To thank Quote Answer

Share this page:

Share this page on...