SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

A083 alarm on SIMOREG

4/4/2011 3:53 PM	Rate (0)
sciftci Posts: 6 Rating: (0)	Hi dear all, I am using a 6RA7095-4KV62 simoreg masterdrive with a S7-416 CPU communicating thru profibus cable and communications boards (function diagram Z110 from operating instructions). And after working for 1.5 years without a problem. I suddenly started to get A083 alarm from drive.The alarm does have a fixed frequency and time. 1) I checked the telegram that i am sending to drive, but found nothing, the telegram seems OK. (checked with PDA) 2) I changed the route of the profıbus cable to the drive. Nothing changed 3) I changed the profibus connector on the drive. Nothing changed. What is your idea and solution on this problem? Thank you in advance. SC
sciftci Posts: 6 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Hammad samar

5/30/2011 3:40 PM	Rate (0)
Ahmed Experienced Member Joined: 2/20/2007 Last visit: 11/19/2024 Posts: 122 Rating: (2)	Hello, Normally A083 comes only when there is no data transfer between master (PLC) and slave (Drive). Please check the drive which is getting alarm and its data interafce block used in PLC. Definitely , you will get something there. Regards, Ahmed

Suggestion To thank Quote Answer

6/16/2011 11:41 AM	Rate (0)
Anakin_2009 Advanced Member Joined: 6/13/2009 Last visit: 6/15/2025 Posts: 26 Rating: (0)	increase telegram OFF time!!!!!!

Suggestion To thank Quote Answer

12/11/2014 9:35 AM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 8/28/2025 Posts: 990 Rating: (5)	how did you solve this problem?
	... thank you ...
Suggestion To thank Quote Answer

12/11/2014 11:08 AM	Rate (0)
sciftci Posts: 6 Rating: (0)	well it has been quite long time... as far as i remember we have changed (decreased) the data transmission rate at that profibus line.
sciftci Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

Share this page:

Share this page on...