Good morning,

I have translated the alarms in polish, when I switch the language(I used to do with a phisical button, in this case F2) I cannot see the translated text, it's empty.

Here the picture of some translated alarms. that should be visible.

N.B: KTP 400 BASIC PN

I have done some updates about UI and the alarms are visible in polish , now. I haven't done particular things.

So , I think I will have no answer, until the next time

I don't know what he did but you could try the following:

1) First make sure your other languages are activated. Go to your HMI Project and open the "Runtime settings". Click on "Language& font" and check if all languages are enabled (with a blue tick).

2) If that's alright click right on your main folder of your HMI project and  select "Compile" and "Software (rebuild all blocks)". Check if your texts are visible now when you change the language.

3) If this didn't help open your project folder in the windows explorer. Delete the "IM" folder in your project's folder. Repeat step 2). The folder is build anew. Check your texts.