nulizhang

 Alarm# 700 000 and higher are all NOT Siemens system alarm--they are defined by m/c builder set by PLC program. --if you have new installed m/c you can find documentation for that alarm or contact m/c builder.

Also your information is limited--what's mean SP1 OK, --spindle is controlled by CNC or just VFD start-stop running the spindle motor. if you cannot get help from m/c builder and want some help from forum--post more detail information ,post pictures of m/c configuration--open cabinet--all drive all CNC,controller PLC.

 

Count

Newly installed CNC Cylindrical machine.  MOvement of SP1 (Spindle), Inner Grinder and Outer Grinder are okay. 

Problem is in movement of X and Z axis.

Getting the "Servo not ready" alarm. Alarm number is 700000

Help required

 Dear nulizhang,

my machine the same problem arlarm 700000 It's user 1 alarm.i have online plc i see it at bit V16000000.0 but i can not find this bit in program.i have go to chart status write V16000000.0=0.it;s ok.but i off machine and turn on it;s appear again. 

please help me clear bit   V16000000.0.

Thank

Linh

------------------------------------------------------------------------------------------
Split from 700000 Servo not ready SINUMERIK 802D SL.

Closed cause question posted twice.

The second thread with the subject cnc miling machine alarm 700000 is published within the conference SINUMERIK CNC automation systems.