Hello... Anyone able to help me migrating this protool project ?

// MSA

------------------------------------------------------------------------------------------
Split from MIGRATION FROM PROTOOL to WINCC FLEXIBLE 2008 SP3.

MSA.Carletti

Hello... Anyone able to help me migrating this protool project ?

// MSA

 Hello,

I couldn't open the file. Please share your project here. It should contains a file with extension *.pdz or *.pdb

Ohh okay... sorry about that... never worked with "Protool" ... :)

Thanks for taking you time to help me btw.

// MSA

MSA.Carletti

Ohh okay... sorry about that... never worked with "Protool" ... :)

Thanks for taking you time to help me btw.

// MSA

 Hello it's size is bigger than 3MB (greater than limit of attachment here).

You can send me your e-mail address and I will send it to you.

Thanks for the help with the project migration... the version of the project was apparently dated and i dont have any newer except the version currently in my panel... is it possible to migrate from af backup image made from Prosave 13.xxx ? ... sorry about the haste... got a tight deadline because of a plant cetifying...

//MSA

Ive got the memory card backup files and a Prosave v13xxxx backup files but none .PBD or .PBZ from the panel yet...

Im currently trying a back transfer/upload...

Any other know file extension or method to migrate from a mp370 ?

//MSA

You need a .PDB file.

Just a ProSave - backup from panel is nor sufficient for migration...

Okay... i finally got the newest version from a external source... and its the right format... will somebody migrate it for me..?

Okay... i finally got the newest version from a external source... and its the right format... will somebody migrate it for me..?

MSA.Carletti

Okay... i finally got the newest version from a external source... and its the right format... will somebody migrate it for me..?

 Hello MSA.Carletti,

I have migrated the 2nd project for you and again, its size is more than 4MB this time. Will send it to you via e-mail now. 

Have a nice day.

Thanks! 

//MSA

Ayman Elotaify

 ..., its size is more than 4MB this time. ...

Yes, WinCCflex projects are much much much larger then the ProTool project with the same function...

Hello,

I have the same problem here... 

Could anyone migrate my project so I can open it with wincc flex 2008 SP3?

Kind regards!

dropbox

Try this- converted pdb to WinCC Flex SP2. Just open in your version

Jay

Thx JWilson!

Could you please delete the file? I have it now and it works perfectly.

Kind regards!

JWilson

Try this- converted pdb to WinCC Flex SP2. Just open in your version

 

Jay

 Hi!

Could you convert my project as well?

 Hello,

Can you please help me with the migration of an Protool project to WinCC Flexible ? I've attached the file for the project.

I can reward you with a beer or something :)

Thanks

ChristophD

the migrated project in attachments

hi,

here is it

regards

Christoph

Anyone able to help me migrating this protool project?

it´s a 7zip file.

Thank you. I can test it next week.

Hi all,

Sorry to make alive this post again but I also need migrating an OP7 Protool project to WinCC Flexible. I´ll be grateful to anyone for helping me ¿ChristofD still here ?

Best regards

Javier Arranz

Thank you ChristophD, so kind.

Best regards

Javier Arranz

Sorry to make alive this post but I also need migrating an TP270 Protool project to WinCC Flexible. I´ll be grateful to anyone for helping me plz ?

Best regards

Fathi

kfathi55

Sorry to make alive this post but I also need migrating an TP270 Protool project to WinCC Flexible. I´ll be grateful to anyone for helping me plz ?

Best regards

Fathi

 The file is to large to upload here (8 MB), Perhaps you give me an email adress and I send the file to you.

IBN-Service

 

kfathi55

Sorry to make alive this post but I also need migrating an TP270 Protool project to WinCC Flexible. I´ll be grateful to anyone for helping me plz ?

Best regards

Fathi

 The file is to large to upload here (8 MB), Perhaps you give me an email adress and I send the file to you.

 Tank's Lot

My mail --Deleted E-Mail--

Gratefully
  Fathi

nevermind

Hi everone,

I'm having problems with the migration of Protool 5.2 Sp2 to Flexible 2008 (I already tried to Flexible 2008 without SP e with SP2, with W7 and with WXP Sp2). The message error is always when the Migration Tool chek the consistency of configuration data.

And stop.

ChristophD

Maybe if you can save one more, save me converting this PDB (the newest version of WinCC flexible 2008 that is more easy to you). :-) pls.

[snip]

Can save one more? pls save me converting this PDB (the newest version of WinCC flexible 2008 that is more easy to you). :-)  

[snip]

After i will import in Tia Portal V15.

Dear CristophD!

Could you please convert tdop file to Wincc projects

Thanks in advance

Could you please convert the attached protool files to Wincc 2008 sp2 or sp3? 

if Wincc file is too large, my email is: [snip]

thanks

Robertov77

Could you please convert the attached protool files to Wincc 2008 sp2 or sp3? 

if Wincc file is too large, my email is: 

thanks

 here is it

This didn't work.

Error: corrupted file

Could someone help me with the conversion of this ProTool project in WinCC Flexible?

Many thanks in advance!

Hi Memphisto,

I don´t know if you have already performed the migration, anyway, I had did the migration, if you still need that then send me your e-mail, the file have more than 3MB and can´t be uploaded here.

Hello,

Can someone convert  my six panels to WinCC flexible 2008 SP2 seeing I only have SP3.

Thanks in advance

Dimitri

Please can I have same, convert form Protool to WinCC TIA 15. Many thanks in advance.

Hallo

I have a problem. can anywan convert protool to winccflexible for me pleas ?

Sir

we attach the TDOP Bakcup Please Convert it. 

Jalson Autoamtion

Sir

we attach the TDOP Bakcup Please Convert it. 

It is not possible for someone to help you because you have not added any files. Hopefully when you say you have a "backup", it is an offline project file and not a device upload. Consider making contact with your local Siemens office for personalized assistance.

Unrelated curiosity.. did you intend typing “automation” as you have?