IN MASTER DRIVE WE CAN CHANGE PROFIBUS ADDRESS AS LIKE THIS ( P60=5, P918=xyz, P60=7 ).

NOW I LIKE TO KNOW HOW I CAN CHANGE A PROFIBUS ADDRESS IN MM440 BY BOP AND WHICH PARAMETER WILL USE, I AM A BEGINNER, PLEASE HELP WITH DETAILS.

Set P0003 = 3, user access level to 3 for 'Expert Access'.

Set P0918 to the required address.

Tractor

IRFAN.CHAUDHARY

IN MASTER DRIVE WE CAN CHANGE PROFIBUS ADDRESS AS LIKE THIS ( P60=5, P918=xyz, P60=7 ).

NOW I LIKE TO KNOW HOW I CAN CHANGE A PROFIBUS ADDRESS IN MM440 BY BOP AND WHICH PARAMETER WILL USE, I AM A BEGINNER, PLEASE HELP WITH DETAILS.

 Hello,

• Set P0003 = 3 and set the bus address in P0918
• Set the bus address on the DIP switches (the block of switches on the left, least significant bit is on the left). DIP switch settings take effect when the MICROMASTER is next powered up, and override P0918.

P0003=3 access level

P0918= profi-bus adress