Hii friends,

I am dealing with a project. Therefore I wanna use 1511C instead of a technology cpu. My project is just need the synchronize the knife position with external encoder while its cutting phase and send it  back to the home position for the next cut. It is very similar to the application "109744840_FlyingSawBasic" length cutting option. I can modify and apply it to my project.

Can I use 1511C / 1512C instead of technology cpu? The difference is as follows only. the missing item is CAM only. I am very fresh with motion items therefore I am asking.

It is important for me to decide and order the necessary pieces asap to dive deeply the system configuration. Because of very long delivery periods.

jwilcoxson

You need a T-CPU for absolute gearing like this, unfortunately.

 thanks, it is really helpful to decide my way.

jwilcoxson

You need a T-CPU for absolute gearing like this, unfortunately.

 hii friend,

i have another question (sorry). !5!%T used as CPU at the sample project. Can I use 1511T instead of 1515T?  There is no alot system on PN for a heavy traffic.

Here is the two systems. Sample config is the top one.

New question published by corkscrew2 is split to a separate thread with the subject FlyingKnife application - IM155-6PN as remote IO modules.

Best regards
Jen_Moderator