hello

Thank you for sharing this case.I copied your case when I entered the instruction

nmcli connection show

 It does not show the selection of gsm types as follow

Then I tried

nmcli device

It shows gsm type disconnected

I tried to establish connection by

nmcli device connect cdc-wdm0

but failed, the output shows

What should I do to establish a connection by using mPCle?

Since I'm not a native English speaker, my question may seem strange

Any Help would be greatly appreciated.

------------------------------------------------------------------------------------------
Split from How to use mPCIe UMTS/LTE card.

Thank you for your reply

Seems like I should provide APN

Where can I find a tutorial?

I'm using Industrial OS V3.2.2.

Best regards!

Seems like I should provide APN

Where can I find a tutorial?

I'm using Industrial OS V3.2.2.

Best regards!

bergmanu

Hi, 

did you provide an APN? According to the error message it seems to be wrong / not there. 

Best regards!

 Thank you very much

Best regards!

apastore

Hi Kaname,

once you're connectef with your IOT2050, you need to navigate to the Network Manager, which manages all the network connections. This can be done by typing nmtui in the terminal. In the nmtui menu, navigate to 'Edit a connection', and select the connection associated with your mobile or cellular module.In the settings for this connection, look for an option to set the APN. Finally, you will need to restart the Network Manager for your changes to take effect. This can be done with the command systemctl restart NetworkManager in the terminal.

BR