As you don'tpost the drive in full--you need picture the whole drive, NOT only the bottom--there is control card parts--I post one manual to see it fit your drives

santy999

Hey everyone. I am getting really exhausted of trying to find manuals specific for the connections on a 611 simodrive i have. it drives a spindle and three axes, for a 1997 TOS VMC machine i purchased with the plan to retrofit.

Besides the motor encoders which are linked to the drives, i also have heidenhain rotational encoders which i have already interfaced with my new controller.

Besides the analog 10v, encoder, and UVW cables, i cant recognize the other cables, for drive enable and pulse enable, other important IOs it might have, probably any limit switches are also wired, but i dont have diagrams for the machine and cant find anything at all that will help me link it with my new controller.

Does anyone have information about the drives in the pictures?

just want to figure out what does what, from the rest i can draw the remaining machine diagram myself. its already connected to working motors which is nice.