Hi,

Is it possible to synchronize the time between the CPU1518-4 PN/DP (as a master) and SCALANCE devices (XC206-2SFP, XC216-4C G) using the SIMATIC time client through PROFINET? If so, could you please advise on how to configure it in TIA V17? I cannot find the way to set S7-1500 as a time master.

I searched for document on how to configure it, but I only found information on using an NTP server with the S7-1500.

If there is further information needed, please let me know.

Thank you so much in advance

Take a look at this older library. I may work as-is in your V17 project, or may require updating first.

https://support.industry.siemens.com/cs/document/82203451

By the way, you can search this support site using the "Search in Online Support" for s7-1500 NTP and get there all on your own without waiting on others to do that for you.

B.PBDK

Hi,

Is it possible to synchronize the time between the CPU1518-4 PN/DP (as a master) and SCALANCE devices (XC206-2SFP, XC216-4C G) using the SIMATIC time client through PROFINET? If so, could you please advise on how to configure it in TIA V17? I cannot find the way to set S7-1500 as a time master.

I searched for document on how to configure it, but I only found information on using an NTP server with the S7-1500.

If there is further information needed, please let me know.

Thank you so much in advance

Dear 0_Einstein,

Thank you so much for your advise.
I was focusing on the wrong point seaching for SIMATIC time client setting for S7-1500.

Best Regards,
B.PBDK