Hi, its more about a doubt...

In the description of the CPU 1518-4PN/DP  it says:

• In parallel to the CPU Runtime, there is an additional C/C++ runtime, in which call-independent, i.e. stand-alone, C/C++ applications can be executed.

That means that... the Hardware of this PLC actually have a separate CPU for executing another runtime? or another hardware dedicated for this purpose? 

Thanks in advance.

https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10341015

Contact your local Siemens representative for a demonstration.  Check online video content for the MFP as well.

@AutoGen_997562

Hi, its more about a doubt...

In the description of the CPU 1518-4PN/DP  it says:

• In parallel to the CPU Runtime, there is an additional C/C++ runtime, in which call-independent, i.e. stand-alone, C/C++ applications can be executed.

That means that... the Hardware of this PLC actually have a separate CPU for executing another runtime? or another hardware dedicated for this purpose? 

Thanks in advance.