Hello Experts,

I have a project that requires all modules to be with conformal coating so I chose :

then the interface module was the problem 

i have to choose ET 200SP because i have 20 modules

ET 200 SP -> IM 155-6 PN ST SIPLUS -> 6AG1155-6AU02-7BN0 because older versions "6AU00" & "6AU01" are marked with the note "For this product a successor is available" 

i did not find this IM in TIA V19,so I checked some topics and checked the data sheet which says :

- 6AG1155-6AU02-7BN0 (SIPLUS) based on 6ES7155-6AA02-0BN0 (Standard)

in topic 109746275 :

"Most of the SIPLUS extreme modules are already available as separate components in the TIA Portal Hardware Catalog. Furthermore, new modules are being constantly added to the Hardware Catalog."

then i downloaded the GSD files from topic 57138621:  but it was for standard parts "IM155-6PN..., IM155-6MF"

then i downloaded the HSP from topic : 72341852 

the result : still can not find the IM 155-6 PN ST SIPLUS.

Any solutions available  with or with out this module?

Thanks in advance

Software used : Tia V19 Update 02

AutoGen_1422480

I have a project that requires all modules to be with conformal coating so I chose :

CPU 1517H-3 PN 6AG1517-3HP00-4AB0  Redundant system

then the interface module was the problem 

i have to choose ET 200SP because i have 20 modules

ET 200 SP -> IM 155-6 PN ST SIPLUS -> 6AG1155-6AU02-7BN0 because older versions "6AU00" & "6AU01" are marked with the note "For this product a successor is available" 

i did not find this IM in TIA V19,so I checked some topics and checked the data sheet which says :

- 6AG1155-6AU02-7BN0 (SIPLUS) based on 6ES7155-6AA02-0BN0 (Standard)

- Engineering with: STEP 7 TIA Portal configurable/integrated from version see entry ID: 109746275

in topic 109746275 :

"Most of the SIPLUS extreme modules are already available as separate components in the TIA Portal Hardware Catalog. Furthermore, new modules are being constantly added to the Hardware Catalog."

then i downloaded the GSD files from topic 57138621:  but it was for standard parts "IM155-6PN..., IM155-6MF"

then i downloaded the HSP from topic : 72341852 

the result : still can not find the IM 155-6 PN ST SIPLUS.

Any solutions available  with or with out this module?

 In the datasheet of that SIPLUS module, it states that the module is based on 6ES7155-6AU02-0BN0, so you should use that to add it to your hardware. That order number you can find in your catalog.

Hati

 

AutoGen_1422480

I have a project that requires all modules to be with conformal coating so I chose :

CPU 1517H-3 PN 6AG1517-3HP00-4AB0  Redundant system

then the interface module was the problem 

i have to choose ET 200SP because i have 20 modules

ET 200 SP -> IM 155-6 PN ST SIPLUS -> 6AG1155-6AU02-7BN0 because older versions "6AU00" & "6AU01" are marked with the note "For this product a successor is available" 

i did not find this IM in TIA V19,so I checked some topics and checked the data sheet which says :

- 6AG1155-6AU02-7BN0 (SIPLUS) based on 6ES7155-6AA02-0BN0 (Standard)

- Engineering with: STEP 7 TIA Portal configurable/integrated from version see entry ID: 109746275

in topic 109746275 :

"Most of the SIPLUS extreme modules are already available as separate components in the TIA Portal Hardware Catalog. Furthermore, new modules are being constantly added to the Hardware Catalog."

then i downloaded the GSD files from topic 57138621:  but it was for standard parts "IM155-6PN..., IM155-6MF"

then i downloaded the HSP from topic : 72341852 

the result : still can not find the IM 155-6 PN ST SIPLUS.

Any solutions available  with or with out this module?

 In the datasheet of that SIPLUS module, it states that the module is based on 6ES7155-6AU02-0BN0, so you should use that to add it to your hardware. That order number you can find in your catalog.

 Thanks Hati for your reply

but if I choose the (6ES7155-6AU02-0BN0) module I can not add the SIPLUS I/O modules, I noticed that all SIPLUS modules (6AG) version are all based on normal Version (6ES), so now should I choose all modules based on the 6ES modules? and i will face no hardware problem then?

Hati

What does the I/O modules datasheet inform you?

just the same as you mentioned before, here in the screenshot of a SIPLUS DI module it's based on its standard version.

the main problem here is that I can not choose a SIPLUS module for a standard Interface module and vice versa.

AutoGen_1422480

Hati

What does the I/O modules datasheet inform you?

just the same as you mentioned before, here in the screenshot of a SIPLUS DI module it's based on its standard version.

the main problem here is that I can not choose a SIPLUS module for a standard Interface module and vice versa.

 Then use the basic module order number in your config.

Okay Thanks for your support.