Dear moderators !

I think this topic should be placed to WinCC section (TIA portal)

Regards, Alex.

Hi Alex,

thank you for the hint

In the future please use the "suggestion" button next to the "to thank" button, because the suggestions are only visible for the moderators

Best regards,

Jen_Moderator

trakyy

Thanks for your help,

It does not give me any arrow to navigate me to the problem. When i double click on the warning, a window appears and says :The object to which "Go to" refers cannot be found. Either the object has been deleted or the link is broken. "Go to" can therefore not be used here. Here is the screenshot.

Isn't it a bug? I thing it should help me to find the problem, but it does not...

Thank you a lot, i m waitng your answer...

 I have the same problem but with different error messages.

I dont understand why this appened.

UPDATE 1: I close all the pages. I rebuild all the project. Now it works!

 You should try to compile>rebuild all because there might have been changes that is related to a library or template of the hmi

trakyy

Hi all,

I have a warning when i compile the hmi project, like this :

"Internal WARNING (detail: direct relation from PS_BorderedShape_Shadow {15733010-7173} to object {15733011-7174} was skipped, failed to get target object key from target id)"

Before my last compile, i removed some images from project graphics. This warning appeared after that removal, but it does not navigate me to the faulty tag. I dont know which graphic cause to this warning. Can anyone help?

Thanks.