Hey,

check this post: Convert 4 byte in real

Regards,

Frink

How does your pressure transducer present the 4 bytes?  DINT (not likely), UDINT (possible), REAL (possible).

Now, what byte order does it send the data?  Big or Little Endian?

If you use the CONVERT DWORD to REAL and the values being received are all over the place and make no physical sense, try swapping the byte order first.

AutoGen_5819022

Hey,

I have connected a pressure sensor with S7-1500 and am trying to read the pressure value and display it. As you can see in the image, arrays [0..3] contain pressure value. how do i read the pressure values from these bytes and convert them to psi.