AutoGen_112472

Hi,

Version: TIA Portal v14 SP1 Update 4

Just create a shortcut on Desktop (copy of Step7 shortcut):
   "Setting the PG-PC Interface" = C:\Windows\SysWOW64\s7epatsx.exe -lnl S7ONLINE -App=STEP7

Regards

 Can you please elaborate the process? I can't understand how to do above? I am also facing the problem.

AutoGen_112472

Hi,

Version: TIA Portal v14 SP1 Update 4

Just create a shortcut on Desktop (copy of Step7 shortcut):
   "Setting the PG-PC Interface" = C:\Windows\SysWOW64\s7epatsx.exe -lnl S7ONLINE -App=STEP7

Regards

 Hi,

Many thanks. It finaly works with this solution :-). Pfffft  Win 10 + Tia portal v15.

 Thank you very much! Four years after your message and solved my problem.

AutoGen_167528

Hi all, I found that problem is in service:  "S7DOS Help Service".

1. Check if this service exist and if it is running on your PC.  

2. If  the service does not exist do following:

a) check if this file exist on your PC:  

Program Files\Common Files\Siemens\Automation\SimaticOAM\bin\s7oiehsx64.exe

b) make the service by "sc" command (run command line as administrator): 

sc.exe create "S7DOS Help Service" binPath= "C:\Program Files\Common Files\Siemens\Automation\Simatic OAM\bin\s7oiehsx64.exe"

c) run the service and change the start up  mode to automatic.

This only help me to solve the problem with "empty PG/PC interface"  

  

Try to start "S7DOS Help Service".

Thank you so much!!!!!!!!!!! My pg/PC interfaces was all gone. I tried lots of recommended methods such as starting s7Dos service or replacing OAM data an run a command as administrator  and .... but non of them worked.

Finally test your solution and allllll interfaces has been back!!

🙏🙏🙏🙏🙏🙏🌺🌺🌺