8/9/2010 9:25 AM | |
Joined: 10/22/2008 Last visit: 7/26/2024 Posts: 369 Rating:
|
Is it possible to change DB's 'symbolic access only' to tags after it was created?? Also I heve a problem with alarm triger bits. In DB Alarms i have list of bits. In HMI it is esential to give word adress. But it doesn't allow me to write it manualy. How i could cope with that? How to switch off in HMI tags symbolic acsess only. Splitted from multi-instance DB in step 7 basic. |
Last edited by: O_Moderator at: 8/10/2010 9:26 AMLast edited by: O_Moderator at: 8/10/2010 9:25 AMnew subject after splitting Last edited by: Oscar_83PL at: 8/9/2010 10:32 AMLast edited by: Oscar_83PL at: 8/9/2010 10:30 AM |
|
8/9/2010 2:27 PM | |
Joined: 9/23/2005 Last visit: 8/27/2024 Posts: 4347 Rating:
|
Hi, I don't know a way (up to now) to convert a "only symbolic" DB to a "not only symbolic". However you can add or extract binary values from a word with user logic (or ready to use blocks). See FAQ: http://support.automation.siemens.com/WW/view/en/41512046 |
Denilson Pegaia |
|
Follow us on