Status Bits for Standard Status Word for MicroMaster 3 and Main Feedback
Bit 0: 1 = Ready to start
Bit 1: 1 = Ready to operate
Bit 2: 1 = Operation enabled
Bit 3: 1 = Drive fault present
Bit 4: 0 = OFF2 (Coast stop command present)
Bit 5: 0 = OFF3 (Quick stop command present)
Bit 6: 1 = Switch-on inhibit
Bit 7: 1 = Drive warning present
Bit 8: 1 = Not used (always 1)
Bit 9: 1 = Serial operation allowed
0 = Serial operation blocked -- local operation only
Bit 10: 1 = Frequency reached
0 = Frequency not reached
Bit 11 1 = Converter output is clockwise
Bit 12: 1 = Converter output is counter-clockwise
Bit 13-15: Reserved for future use: These bits might not always be zero

Status Bits for Standard Status Word for MicroMaster 4 and Main Feedback
Bit 0: 1 = Ready to start
Bit 1: 1 = Ready to operate
Bit 2: 1 = Operation enabled
Bit 3: 1 = Drive fault present
Bit 4: 0 = OFF2 (Coast stop command present)
Bit 5: 0 = OFF3 (Quick stop command present)
Bit 6: 1 = Switch-on inhibit
Bit 7: 1 = Drive warning present
Bit 8: 1 = Not used (always 1)
Bit 9: 1 = Serial operation allowed
0 = Serial operation blocked -- local operation only
Bit 10 1 = Frequency reached
0 = Frequency not reached
Bit 11: 0= Warning: Motor current limit
Bit 12: 0= Motor holding brake active
Bit 13: 0= Motor overload
Bit 14: 1 = Motor running direction right
Bit 15: 0= Inverter overload