AZRAIQI

HI all,

I faced a small problem as i think, when i compile my function i get worning with this msg

"Network 3,Declaration "Output" of actual parameter does not match the declaration "Input" of formal parameter"

see Here

What i shuld doing noW !! ?

i guess you have declared "#DN" as output parameter and you are trying to use it in the input side. Declare it as Input/Ouput variable and your problem willbe solved

S7 AUTOMAN

hello,

i guess you have declared "#DN" as output parameter and you are trying to use it in the input side. Declare it as Input/Ouput variable and your problem willbe solved

joebez73

Hi AZRAIQI you have a reset output in network 1 it is already at 0 so you may need a set output

AZRAIQI

joebez73

Hi AZRAIQI you have a reset output in network 1 it is already at 0 so you may need a set output

it's in Output

delete "DN" from the "Output" column and add it in the "InOut" column

huggy_d1

AZRAIQI

HI all,

I faced a small problem as i think, when i compile my function i get worning with this msg

"Network 3,Declaration "Output" of actual parameter does not match the declaration "Input" of formal parameter"

see Here

What i shuld doing noW !! ?

Me, I either ignore it, or I rework my logic to use an internal tag (temp or static depending on block needs) and mimic the output to the internal tag. Then anywhere I would have wanted to refer to the output tag, I use the internal one. No warning but more likely to cause maintenance problems, so be sure to document it well as to why it is there.