hi

from playstore we can download this app or not?

Hati

JKV JAMES ❤️(König James)

Does siemens future plcs mobile phone friendly?

If a PLC can connect to a smart phone, it's much comfortable to go to upload /downloads a non critical system program and online view it over Android app than going with Bulky laptops with few copies of Ti portal.

Moreover, it's easy for field technicians or plant guys to download a program wirh siemens app if it it send by mail?

 

That's why we have Simatic Automation Tool.

SIMATIC Automation Tool

After a control program is created and verified with the Siemens TIA Portal software, the SIMATIC Automation Tool can be used in the field for operating and maintaining SIMATIC S7-1200, S7-1500, ET 200, HMI, SITOP, SCALANCE switches, RFID and MOBY Ident modules.

Automation Tool operations:

• Scan a PROFINET/Ethernet network and identify all devices connected to the network
• Flash device LEDs or HMI screens to physically locate a device
• Create a table that maps the accessible devices on the network
• Assign addresses (IP, subnet, gateway) and station name (PROFINET device)
• Set the time in a CPU to the current time in your PG/PC
• Download a program to a CPU (support failsafe programs needs at least V3.1) and HMI panels
• Put a CPU in RUN or STOP mode

• Perform a CPU Memory reset

• Backup/Restore CPU or HMI data to/from a backup file (failsafe needs at least V3.1)
• Upload service data from a CPU
• Read the diagnostic log from a CPU
• Reset a CPU to factory default settings
• Update firmware in a CPU and attached modules
• Upload, download, or delete Recipe data (stored at SMC) from a CPU
• Upload or delete Data log data (stored at SMC) from a CPU
• Document and save your network information
  • in a standard text .csv file or
  • an encrypted & password protected .sat file
• API support to create custom .NET applications based on the functionality available in the SIMATIC Automation Tool

All named features can operate in parallel to various devices.

------------------------------------------------------------------------------------------
Split from Smart PLC| Vision 2020 |.

hi,

no is not possible.

regards

christoph