Thanks for all the inputs.

In my case, I have solved the problem by passing the Automation stations to a new project and then ABT Site could open without errors. Now I can see the Automation Stations in XWP devices.

In ABT Site, when I assign the automation station to the PXM50E I do not see them after that, in the list of the building devices, assigned to the panel? I'm working only in offline, I not connect to any AS or the panel. I have to be online with the AS to work offline, build the graphics, of the PXM50E?

Hi,

You should be able to carry out all Engineering tasks Offline. After which, you would then configure the PXM50, and then download to it from ABT.

After you have assigned you're devices in ABT, you need to go to 'Engineering in Browser'. Make sure to use Chrome.

In the Tools menu when in the browser, you select Data Point Integration - this then allows you to add points from your assigned controllers for use in graphics / trend views etc.

Regards,

Hello!

I have done that workflow but the list is empty.

Hi,

Do you have access yet to the actual PXM50? When Online to the PXM50, you have the option to Discover and Assign devices via the web browser, rather than doing so via the ABT window when Offline. If you do have the PXM50, you could configure it and download it 'empty' from ABT. Then go Online, and try to assign the controllers that way, and try the Data Point Integration again.

Another thing to try is to create another new project with a single PX (containing only a few points), and then add the PXM50. Repeat the process you have already went through to see if you have the same result.

What version of XWP are you using?

Regards,

Eureka!

In my case, I did not had any PXM50E or Automation Station available, and to import to ABT Site the AS, I had to go in CFC to AS simulator and then when I came back to ABT Site it immediately imported that AS.

Time to startworking on those Graphics!

Thanks for the inputs!