Hi team, 

Can anyone share the moby command parameters to read any type of Tags (ISO)? 

Im using FB45 and 310R as reader, and 370C ad communication module

I changed ON time value  to 1 ( which is for all iso type of tags) but reader not deducting the tag. 

Any idea? 

------------------------------------------------------------------------------------------
Split from RF310R _Card HID 13.56Mhz.

Hello,

you've done everthing correctly.

Unfortunately the reader can't work with this tag (HID's iCLASS 13.56 MHz)

You could use a RF1000 reader (RF1040R, RF1060R, RF1070R) to read the UID.

Hi, 

All working with simatic RF340T transponder. 

I'm trying to read write from my company id card, which i believe iso 15963 protocol card bit not sure how to identify. 

My company id card is not deducting from 310R reader, led still remains green color. 

So, I modified the moby parameter (ON time) to 1, which is to read all iso type of card. 

I tested with other parameters like 1 to 7, nothing works. 

Moby type selected in HW configuration parameter as "MOBY D/U/RF300"

any suggestion? 

Hello,

if you're using a Gen2 reader you can use the setup mode for testing.

When connected to power the LEDs of the reader are blue. When the reader detects a tag the LED color turns to white. If it doesn't turn white, the tag can't be used.

Hi, Thank you.

I hope RF310R is different Gen (May be Gen1 !!!). as 310R Led works with Green(If no Tag Present) and Orange( If Tag Present).

Please find the attached my HW configuration and MOBY DB Command. 

ON_time  = 0 at the moment, but modified to 1 to 7 , but no use to read my Company ID card

Hi Thank you,

I can't use other types of readers, as our plant is equipped with 310R (almost 3000+ readers), so it will be huge cost impact if we change other type of readers.

As 310R is not compatible with iCLass + Prox RFID carda, could you please suggest a Tag(Transponder) which is low cost and compatible with 310R reader?