Good afternoon to everybody! I have a problem with the creation of HMI-Station in my Step 7 project.

I can only insert Simatic 400 Station, Simatic 300 Station, H Station, PC Station, Other Station, S5-Station, but NOT HMI-Station.

Simatic Manager V5.6, Win CC Flexible 2008 SP5 are installed. How can I solve this problem?

Thank you for your attention

Hello,

Try to do a repair installation of WinCC flexible.

There should be an option like 'integration in Step 7'

Best regards,

Wizard

Hello,

in some cases you don't need integrate WinCC to your Step7 environment and create your station alone inside WinCC. When you integrate WinCC to Step7 and you don't have next time WinCC installed with correct version, you can have some problems with open prj but I agree with Wizard that this is good recommendation.

https://www.google.com/search?q=simatic+hmi+station+package+download&sca_esv=9dcfd037fee0fef7&sxsrf=ADLYWIKJtVL1PEsO-4h-BnDvjivpINRIEw:1731308764947&ei=3KwxZ5GxOfiCxc8PzPzz2Qs&start=10&sa=N&sstk=ATObxK4C4MKU4pJxkLSfK0VyaoldF2lz6cVpKM2aAjhRiUGz5HadVzxPSZMCM7AaMae_HQozM0GzOkMMiqgQ5a7EYswc3e2IbD0_RQ&ved=2ahUKEwiRj7nf29OJAxV4QfEDHUz-PLsQ8tMDegQICBAE&biw=840&bih=613&dpr=1#fpstate=ive&vld=cid:36c7c16b,vid:F_IFRxqYiX0,st:0

this is the solution