Hello 

I have two HMI MP377 12'' Key, communicate with Profibus DP with S7 416-2DP and what i want is replace the old one for the new one.

Profibus Adress is 23 and i think is all i need to change to the new HMI at S7-Transfer Settings in HMI Options Panel to replace.

But somehow i dont know is not working, the communication is showing the #### for every tag in HMI screens like i dont have any profibus connect.

I have WinCC flexible 2008 SP5 Update2.

Can anyone help me about this?

Thanks,

Thanks for the help!!!!

I have change all parameters like the old HMI,(Profibus adress,Profibus tranmission rate, Highest Station,Profile), its supposed to work in new HMI.

Do i need to backup by Prosave?I use WinCC Flexible to connect with HMI or do i need to use Prosave?

Thanks,

I dont have any alarms in my HMI.

But i'm trying to download to HMI ther version and its not possible, its giving a error.

I have tried with MPI cable, but now i'm trying with Ethernet cable.

I had transfer the project to HMI by Profinet or MPI, and i  add an alarm view justo to see what happen.

And i have the following errors as i share in the photo below.

Thanks for help,

Regards

Thanks for the help Wizard!!!! 

The information you sent to me help me a lot!!!

Best regards,