Please also see the attached screenshots.

We have a series of machines that are equipped with 7" Basic Flexpanels.
On one of the screens in these panels it should be displayed if the machine is connected to main power, auxiliary power or both.
I checked one of the machines today and none of the "cables" were visible even though the machine was powered up.

That must be an error but how do I see which tag are supposed to make the "cables" visible?

Furthermore - how / where do I set up this visible / not visible thing on the lines (I  am sure I can find the signals in the PLC)?

Hello Hati,

Thank you for answering.

You put me on the right track but the Visibility option was used for another differentiation.
In this case it was the Appearance option that was used. to either make the line black or the same color as the background.

Hati

In the Animations tab, press the arrow in the side list to open the attributes for each item you have there. There you will find Display -> Visibility