Regards all.

When used bit or value in text or graphic list in program in the PLC we are compare this the bit or value with some else the bit or the value. But if I wont set the condition and  the result without "leaving" HMI  I must used VBScript.Can me tell somebody how in VBScript select the text or the graphic list and compare if used the bit ( compare with some else condition) or same the value.

Thanks

Anyone with some information, some suggestion  or another idea for this question?

I don't exactly understand what you need, I am afraid...

Why you do not just compare the values in PLC and use an additional tag on HMI?

Hello zzvss,

I am sorry, but from your description I dont really understand your problem. And I fear others might have same problems to identify what you need.

Can you describe your problem more precise? Maybe you have someone to help you with problem description...

regards

Best regards all.

Problem is solved  .

Thanks Mr. Willima_B, for idea (multiplexing), Mr. BALAKRISHANAN92 for post how realize multiplexing, and above Mr. K!ike and Mr. Murof for most the post and guideline to Siemens produced support how solved problems in VBScript (english "und deutch").

Thanks all who are write my post and please the moderator that cols post.   

Hello zzVss,

please, can you send me example how you solved this issue?