8/23/2021 1:19 PM | |
Joined: 12/1/2020 Last visit: 8/14/2023 Posts: 19 Rating: (0) |
Hi All I'm using an LOGO! 12/24RCE to carry out a routine. It uses counters to track a distance via an encoder before it does something. After a lot of time trying to get this to work I read that for the high speed inputs to work with an encoder they have to be connected direct to the counter and not go through any other block ie a switch first. Please see the attached image Can anyone advise of a PLC that would work with this logic or advise how it could be rearrange to work as required. Thanks Adam ------------------------------------------------------------------------------------------ |
Last edited by: The Helping Hand at: 08/23/2021 14:50:54New subject after splitting |
|
8/26/2021 4:27 PM | |
Joined: 12/1/2020 Last visit: 8/14/2023 Posts: 19 Rating: (0) |
Thanks again I will take a look. All the best
|
Follow us on