12/12/2022 4:07 PM | |
Joined: 9/20/2016 Last visit: 8/1/2024 Posts: 7 Rating:
|
Hello, Mybe this is not a right place for this question but anyway. My first encounter with the SRT400 - T400. I am trying to connect to T400 using Drivemonitor V5.05 using Serial 1 interface on pins 67-68-69. Unfortunately unsuccessful. The T400 is used as a "standalone" in a rack. All switches are in the off position. Regards, Matjaz ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 12/13/2022 08:28:52New subject after splitting |
|
12/12/2022 5:22 PM | |
Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating:
|
Check switch S1/8: on = RS485, off = RS232 User Manual T400 Technology Module: |
Last edited by: miami at: 12/12/2022 17:25:38 |
|
Follow us on