kai_moritz88

1. Connect the PC to the panel.

2. Open a web browser.

3. Enter 'fc360.siemens.com' or the IP address of the Panel (e.g. 192.168.251.100) in the address bar and press <enter>. ->'FC360 Panel Configurator' is open

4. Enter access level 3 password to log into access level 3 on the panel.

5. Modify the current configurations as needed. If modifications were already done in 'FC360 Desktop Editor 2.0', click 'Open', and then browse to the modified configuration file and confirm to override the open configuration.

6. Click 'Apply', and then click 'OK' to confirm. ->Configurations are downloaded to the panel.

7. Log out of 'FC360 Panel Configurator' and disconnect the PC from the panel.

 Hi

identical problem but no access level 3 code available,

any help?

------------------------------------------------------------------------------------------
Split from Cerberus FIT applying configurations to the panel.