What software is used to connect to kp8?
Created by: AutoGen_4474858 at: 4/28/2024 6:26 AM (2 Replies)
Rating 
Thanks 0
3 Entries
| 4/28/2024 6:26 AM | |
Joined: 11/12/2023 Last visit: 9/15/2024 Posts: 1 Rating:
|
hi dear which software did you use for connect to kp8 and could change the ip address and device name ? ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 04/29/2024 09:45:26New subject after splitting |
|
| 4/29/2024 10:30 AM | |
Joined: 1/21/2013 Last visit: 11/7/2024 Posts: 3248 Rating:
|
Hi, The KP8 is simply a PROFINET IO device. You can therefore use any software that is able to change the IP parameters of a PROFINET device. One option offered free of charge by Siemens is the use of PRONETA Basic. Kind regards |
| 5/3/2024 12:28 PM | |
Joined: 8/3/2009 Last visit: 11/7/2024 Posts: 14112 Rating:
|
Hello here you can see how to program the Key Panel: https://support.industry.siemens.com/cs/de/en/view/63482149 Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on