Navigation
Rating 
Thanks 0
3 Entries
| 6/18/2009 7:01 PM | |
|
Posts: 1 Rating:
|
HI, Trying to find the dimension drawings for Control Unit CU240 DP-F. Anyone has got it? Many thanks! |
| 6/22/2009 4:07 PM | |
|
Posts: 739 Rating:
|
I’m Afraid, but there are no dimension drawings for G120 CU available. What for do you need it? |
| 6/22/2009 6:36 PM | |
Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating:
|
Dear all, I think the requested dimentional dimensional drawings is exist some where. Try the following link: List of ConfiguratorsThen go to list of configurator in the right hand side of this site. and select your drive correctlly. It may take minutes to generate the final part number and finaly you will be able to download list of documents contains the dimensional drawings you need. Also you will found isometric drawing. Hope this helps, Regards, |
|
Ayman Elotaify |
|
Follow us on