New question published by Impala6107 is split to a separate thread with the subject Is there an easy way to verify the panel images are present? .

Best regards
Jen_Moderator

Reusing an old thread, I ran into this problem. And find a solution that helped me. Maybe it can help someone else too.

I had a job where it was to be updated from TIA16 to 17. But when I was going to make changes in the HMI, the problem we are discussing occurred.

My solution then was to go back to TIA16. And via HW-config update version.

HW-config -> HMI properties -> General -> Change device/version.

Downloaded the HW-config, then the software for the HMI. and repeated this until the HMI image reached version 16. Then I went back to TIA17 and performed this one more time so the image became v17. Perfect thing to do while drinking coffee. And now the problem is gone, the HMI image is updated and everything is as it should be.