10/15/2018 9:30 AM | |
Joined: 10/7/2009 Last visit: 8/19/2023 Posts: 266 Rating:
|
Hi, Just as ChristophD and vivekmishra197 said and this link solved the same problem of mine: Why do you get the message "Open WinCC project The user does not have the rights to perform this action!"? Best regards, Yu-wen |
2/8/2022 11:15 AM | |
Joined: 2/8/2022 Last visit: 7/26/2024 Posts: 1 Rating:
|
i have the same problem i did what you said what else can I do |
Last edited by: OsmanCeylan at: 02/08/2022 11:17:36 |
|
2/8/2022 11:22 AM | |
Joined: 5/12/2006 Last visit: 8/28/2024 Posts: 22346 Rating:
|
give us relevant information like screen about you config and groups memberships |
8/15/2024 4:41 PM | |
Joined: 5/18/2021 Last visit: 8/15/2024 Posts: 2 Rating:
|
Add Everyone (User) to the Simatic HMI Group then logs and login again then it worked for me. |
Follow us on