7/23/2023 10:52 PM | |
Joined: 12/31/2020 Last visit: 6/13/2024 Posts: 1 Rating:
|
I have the same problem |
7/28/2023 11:04 AM | |
Joined: 8/3/2009 Last visit: 8/15/2024 Posts: 13561 Rating:
|
Hello I tried the C Code in WInCC Prof RT V18 and it works without problems. I used the example of: https://support.industry.siemens.com/cs/de/en/view/748844 With a little Modification on a buttonpress in a screen: ---------- #include "GlobalDefinitions.h" ----------- bye Murof |
If this Information really helps, you could use the Rate function |
|
8/27/2024 9:21 PM | |
Joined: 8/27/2024 Last visit: 8/28/2024 Posts: 1 Rating:
|
very helpful |
Last edited by: U_5af83257-8c21-4e6d-9a31-bd8e5ca2c827 at: 08/28/2024 08:35:52 |
|
Follow us on