WinCC Unified PC slow performance after a while of use
Created by: Celio_Goetten at: 10/10/2022 4:55 PM (8 Replies)
Rating 
Thanks 0
9 Entries
| 10/10/2022 4:55 PM | |
Joined: 4/25/2012 Last visit: 3/28/2025 Posts: 29 Rating:
|
I'm using WinCC Unified v17 update 5 and after about a day or less of use without closing the browser the operation on them starts to be extremely slow. Computer resources (cpu, ram and disk usage) are all normal. Performing a refresh using the F5 function key makes WinCC return to normal performance. The behavior happens in both Microsoft Edge and Google Chrome. Has anyone encountered similar behavior?
|
| 10/10/2022 5:22 PM | |
Joined: 1/21/2013 Last visit: 4/19/2025 Posts: 3765 Rating:
|
Hi Celio_Goetten, I know that there are still different performance issues on the WinCC Unified Systems. Without knowing your project in detail, we - the community - would not be able to give you some advice. Since everyone is interested in a WinCC System with good performance, it would be better to report your observations to Siemens, creating a new support request. Kind regards |
| 10/11/2022 7:11 PM | |
|
Joined: 4/25/2012 Last visit: 3/28/2025 Posts: 29 Rating:
|
Hello Stefan, I am in contact with Siemens here in Brazil. Regards |
| 5/10/2023 7:55 AM | |
Joined: 8/19/2019 Last visit: 4/11/2025 Posts: 1 Rating:
|
Hello i am facing the same issue , is your problem fixed? And if it is what was the problem? |
| 5/12/2023 8:53 AM | |
Joined: 3/11/2012 Last visit: 3/25/2025 Posts: 33 Rating:
|
I am using WinCC Unified version 18. Have experienced similar problems where the browser would "freeze" after running for a week or so. Problem reported to Siemens support, but have not received any solution.I had to make an alarm for the operator that forces them to restart PC after 6 days. |
| 7/18/2024 5:25 AM | |
Joined: 6/6/2021 Last visit: 4/10/2025 Posts: 35 Rating:
|
Hi all, I have also issue with slow performance WinCC Unified. For me it hleped to ackonvledge alarms. But after a while, it is again slow. Runtime v17 TIA portal v19 Best regards Lubomir |
Last edited by: Lubomir B. at: 07/18/2024 05:26:17 |
|
| 7/18/2024 5:34 AM | |
Joined: 5/22/2020 Last visit: 3/27/2025 Posts: 52 Rating:
|
Hi, When i started my own project i use for every screen a new 'screen', unified can't handle that properly. When i use one headscreen and use for all the others a 'window' the problem of freezing and slow performance after a while was gone. Maybe this can help you too. |
|
|
|
| 4/13/2025 3:41 PM | |
Joined: 8/1/2022 Last visit: 4/14/2025 Posts: 2 Rating:
|
I am facing the same problem. any better solution? please |
| 4/13/2025 6:38 PM | |
|
Joined: 1/21/2013 Last visit: 4/19/2025 Posts: 3765 Rating:
|
Hi Peter Doan, You will understand that such a simple question without further details can only lead to very general answers. So maybe using a much faster PC will help you, but I doubt that is what you want to hear, and maybe you are using a panel and not a PC, then this answer would be useless. So if you would provide much more detail, the change to get a useful answer will increase. However, I assume that the problem needs to be analyzed in detail, so sending your project to Siemens might help to get it analyzed. Kind regards |
Technical Forum - SiePortal Community
We are working on a new user interface with better overview and more relevance.
Follow us on