6/22/2010 6:22 PM | |
Posts: 2 Rating:
|
I have only a drawing named 4 236001 0 "Starting Package" that shiows a "Turning Gear Motor, KKS-MBJ-AED01 WBS-M-342-02, 20HP, 125VDC, description. Peerhaps is an older version of new motors you make. We are going to place this starting package as new, but we require this motor which was taken to another turbo-generator, also Siemens,unstaled near by. Plase help me get this replacement.
Attachmentturning gear motor.pdf (598 Downloads) |
6/22/2010 6:24 PM | |
Posts: 2 Rating:
|
Please look at the information and do not tell me "it is impossible", you are SIEMENS. I will be pleased if you could jut help me. Thank you |
6/22/2010 7:44 PM | |||||
Joined: 9/27/2006 Last visit: 8/28/2024 Posts: 12280 Rating:
|
hello venezuelan; The drawing you show is from Voith Turbo, which is a conglomerate providing all kinds of equipment for generators and accessories. Probably in this project they were acting as sub-contractors for the Siemens team. I believe you have more chance of locating your spare parts through one of their reps. I would suggest you try their website; here is what I found looking for Starter Packages in their alphabetical Products page: http://www.voithturbo.com/vt_en_paa_ind_varspeed_prod_torconv.htm One of the available selections is "Starterpackages: Complete start-up package for gas turbines" Hope this helps, Daniel Chartier Note: if your moniker reflects your real location, then maybe this Voith rep. address can help you:
|
||||
Last edited by: dchartier at: 6/22/2010 7:50 PM |
|||||
Follow us on