Hello members

I have a S7-200 automat with a CPU 214 and one module of analogical exit EM232.
In my program I hope impulses starting from an incremental coder in order to calculate the number of revolutions.
I to manage to calculate speed with the conversion ratios necessary and also I converted this speed into analogical tension who must vary between 0 and 10V.
The problem is that I do not know how to make to have the value to calculate by programming at analogical exit of module EM 232 knowing that the exit of this module is on AQW XX is coded out of 12 bits.
Really I need for your assistance...
Thank you in advance....

Hello members

Thank you very much Essam for your answer.

I tested and there is no error of compilation.

For better I send a copy to you to correct me if there are errors.

Thank you for your assistance.

Another question please I use a Hight Speed Compter of S7-200 CPU 214, HSC0

to count the pulse repetition frequency of an incremental coder, the entry of this compter east defines in I0.0 ( fast Input).

My question is what it is necessary to define this entry in my program CONT or it will be taken by default when I use the HSC0.

Dear Essam & Wizard

I thank you for your great assistance.

Draxelmaier