Hello,

Sorry if i did not add the topic to the correct place, I am new to This platform.

So I wan't to  connect software acs790 to my webserver ozw775. I obviously don't have oci cable and want to connect trough ethernet or usb port. Can and how i do this?

Can you give me any pointers. Thanks!

Dear Rebbellyon,

A communication between PC with ACS and OZW775 over USB or Ethernet is possible.

Please download the commissioning document  from this page:

https://www.downloads.siemens.com/download-center/

Have a look from page 25 how it works.

Important is also that you configure the communication in the ACS with the right settings, means over USB or Ethernet in the propreties of you project.

Best regards

Richard