Hi guys !!!

Is it possible that we can communicate IM 151-8 PN CPU with PAC 4200 with Switched Ethernet Module 7KM9300-0AE01-0AA0.  I want to communicate it over PROFINET.

I have connected CPU with PAC meter with normal straight LAN cable and i am able to ping meter  but when i am going online in hardware it is saying module configured but not available Screen shot attached. What can be possible solution for this > Please help if any one faced same issue.

BR

Razeve

Hi,
Because the PAC is now viewed by the CPU as a Profinet IO device,
you must proceed as you would do for an ET200 IO device.
That means that the NameOfStation set in the PAC must match with the Profinet name to the PAC device in the offline project (that was of course downloaded into the controller).

See manual.
Chapter 5 is about commissioning (ch 5.1 on the device, ch 5.2 Step 7 classic,  ch 5.3 using TIA).

See also page 97 how to diagnose and take measures to correct the problem.