4/9/2017 7:14 PM | |
Posts: 2 Rating:
|
Hello, I installed the Getting Started on my IOT200, too, and want to start my exercises. But I cannot find any documentation how to address the IOs. For example: where is documented, that the USER led is addressed via mrcc with number 13? And where is documented, how to address the USER button? I found the documentation about the mrcc at http://iotdk.intel.com/docs/master/mraa/index.html but I could not find any device specific information there. Best Regards, barteldan2 |
This contribution was helpful to
1 thankful Users |
4/11/2017 10:05 AM | |
Joined: 4/28/2015 Last visit: 8/26/2024 Posts: 3345 Rating:
|
Hi, that the USER LED is pin 13 is described in the Getting Started Document. There are several posts about the User Button. For example here: https://support.industry.siemens.com/tf/ww/en/posts/how-can-the-status-of-the-user-button-be-queried/152949/?page=0&pageSize=10 The assignment of the other GPIOs could be found here: or you can use this picture for example. Best regards! |
Last edited by: bergmanu at: 4/11/2017 10:05:40 AMNot working for IOT2050 support anymore from March 1st, 2024. |
|
Follow us on