9/15/2021 9:05 AM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
Hello again is it possible to simulate HMI kp400 from your project on PC without HMI. i have tried to set ip to pc in connection but it does not work ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 09/15/2021 12:12:37New subject after splitting |
|
9/15/2021 9:22 AM | |
Joined: 12/18/2014 Last visit: 4/18/2024 Posts: 32827 Rating: (4061)
|
Yes, it's possible. I have no KP400 and so I can test the HMI program only in simulation but with a real LOGO!. |
9/15/2021 10:09 AM | |
Joined: 12/18/2014 Last visit: 4/18/2024 Posts: 32827 Rating: (4061)
|
No. I have test it with a 0BA8 of the first generation (FW V1.08.01). |
9/15/2021 10:10 AM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
my ip address on hmi i put as my pc 192.168.0.99 on my logo is ip 192.168.0.2 |
9/15/2021 10:11 AM | |
Joined: 12/18/2014 Last visit: 4/18/2024 Posts: 32827 Rating: (4061)
|
This IP addresses are okay, both devices are in the same subnet. |
9/15/2021 10:16 AM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
|
9/15/2021 10:17 AM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
yes they are in the same subnet |
Follow us on