Hello.

I`ve gor CPU 1500 and TM_cont module, pls tell me hot to configure it. I need the actual spped of conveyor. I find some exemples https://support.industry.siemens.com/cs/document/76798774/counting-and-measuring-with-the-counter-module-tm-count-2x24v-?dti=0&lc=en-US. But I can`t even understand what exeple I need (Cupcake or botteles). I just need to count impulsel thats the main target. So must i use the %I0.0 and %I0.1 inputs? Do i need Manuel operation --> Measuring and where is my "speed tag" in this case? And i think I must use OB40 with hardvere interrupts with event from TM cound (trigger I0.0)? And so in OB 40 there`re my impulses?

Thanks for your quote, anyway!

AlePa

Hello.

I`ve gor CPU 1500 and TM_cont module, pls tell me hot to configure it. I need the actual spped of conveyor. I find some exemples https://support.industry.siemens.com/cs/document/76798774/counting-and-measuring-with-the-counter-module-tm-count-2x24v-?dti=0&lc=en-US. But I can`t even understand what exeple I need (Cupcake or botteles). I just need to count impulsel thats the main target. So must i use the %I0.0 and %I0.1 inputs? Do i need Manuel operation --> Measuring and where is my "speed tag" in this case? And i think I must use OB40 with hardvere interrupts with event from TM cound (trigger I0.0)? And so in OB 40 there`re my impulses?

Thanks for your quote, anyway!

hi AlePa,

have you had a look to the documentation that is provided in the entry you posted.

Everything you want to know, you find in it.

The example that fits your purposes is the cupcake-scenario.There is also the measurement of the conveyor speed.

You don´t need a HW-interrupt OB.

hope this helps,

regards,

mopS04

 

AlePa

Hello.

I`ve gor CPU 1500 and TM_cont module, pls tell me hot to configure it. I need the actual spped of conveyor. I find some exemples https://support.industry.siemens.com/cs/document/76798774/counting-and-measuring-with-the-counter-module-tm-count-2x24v-?dti=0&lc=en-US. But I can`t even understand what exeple I need (Cupcake or botteles). I just need to count impulsel thats the main target. So must i use the %I0.0 and %I0.1 inputs? Do i need Manuel operation --> Measuring and where is my "speed tag" in this case? And i think I must use OB40 with hardvere interrupts with event from TM cound (trigger I0.0)? And so in OB 40 there`re my impulses?

Thanks for your quote, anyway!

hi AlePa,

have you had a look to the documentation that is provided in the entry you posted.

Everything you want to know, you find in it.

The example that fits your purposes is the cupcake-scenario.There is also the measurement of the conveyor speed.

You don´t need a HW-interrupt OB.

hope this helps,

regards,

Well I think that something wrong with that exempl, because I cant even simulate it in the PLC_SIM. I used the instruction (https://cache.industry.siemens.com/dl/files/774/76798774/att_14424/v1/76798774_tmcount_doku_v1_0_en.pdf ) on page 53. Quote from table 7-4.1 "The software gate is kept open in the FB, i.e. only the hardware gate has to be opened. This is done by a positive edge at the digital input 0 (DI0).". So if you will look in the PLC_TAG table you will see DI0 is %I14.5. And if you will look at HMI Bake_supcake.PDL then "Internal Gate" the animation of the indicator you will see TAG name STS_GATE(1), it is STS_GATE in the PLC tags it is %I14.2. And when you use cross-references on the STS_DI0 there`re no branches. So I mean i can`t evet do the first step with simulation. Can someone hel me?

Thx for your answers!